Asymmetrical Tactical · relaxed, longline, stepped hem
Asymmetric-Hem Long Sleeve Tee
SkewHem
220 GSM heavy jersey, 58 cm chest, 68 cm short side / 80 cm long side, raw-edge stepped hem, 5 cm drop shoulder, offset seam panel
FRONT
BACK
Free vector flat
No account
The drawing above, front and back, as an editable vector — open it in Illustrator, Figma or Affinity and put your own graphics on it. Measurements aren't on the flat; they're in the tech pack.
The vector flat above is free and always will be. The tech pack — graded measurements, tolerances, fabric weights and construction — is the paid part.
Starting spec — make a sample before you order in bulk.
New to tech packs? Read how to make one, step by step →Fabric
220
GSM · Heavyweight · range 200–240
Heavyweight single jersey — 100% combed cotton. Pre-shrunk, peached face; needs enough body to hold a raw edge without curling
Trim: 1x1 rib (neck) · 95% cotton / 5% elastane · 260 GSM
What does GSM mean? Read the fabric weight guide →How it's made
Shoulder
Drop shoulder, 5 cm drop — Overlocked, back-neck tape
Neck
1x1 rib band · rib height: 2 cm · topstitch: Cover-stitch 0.6 cm
Sleeve hem
2 cm raw-edge, single overlock inside (raw edge)
Body hem
2.5 cm raw-edge, laser-cut, single overlock on the inside face only (raw edge). Stepped hem: wearer's right drops 12 cm below the wearer's left; the step falls on the offset seam
Panel seam
Offset vertical seam on the front, 9 cm right of centre front, running hem to armhole — this is where the step lives
Side seams
4-thread overlock; side vents 8 cm, bar-tacked
Stitch density spi
12 stitches per inch
Size chart
Garment laid flat · M is the sample size
Measure
XS
S
M
L
XL
XXL
A
Body length, short side (HPS to hem)
± 1 cm
65
66.5
68
69.5
71
72.5
A2
Body length, long side (HPS to hem)
± 1 cm
77
78.5
80
81.5
83
84.5
B
Chest width (1 cm below armhole)
± 1 cm
52
55
58
61
64
67
C
Hem width
± 1 cm
54
57
60
63
66
69
D
Across shoulder (seam to seam)
± 1 cm
48
50
52
54
56
58
E
Sleeve length (from shoulder seam)
± 1 cm
54
55.5
57
58.5
60
61.5
F
Sleeve opening (flat)
± 0.5 cm
14
14.5
15
15.5
16
16.5
G
Armhole (straight)
± 0.5 cm
24
25
26
27
28
29
H
Neck width (seam to seam)
± 0.5 cm
17
17.5
18
18.5
19
19.5
I
Front neck drop (HPS)
± 0.3 cm
7.5
7.5
8
8.5
8.5
9
J
Back neck drop (HPS)
± 0.3 cm
2.5
2.5
2.5
2.5
2.5
2.5
Colourways
Concrete
#9A9A94
Washed Black
#2B2B2B
Rust
#8C4A2F
Trims & notes
• Neck tape
• Printed neck label
• Care/content label
• Raw edges only work above about 200 GSM. Below that the hem curls within a few washes and the asymmetry reads as a fault.
• Ask the factory for a laser-cut edge, not a scissor cut — the sealed edge is what keeps it looking deliberate.
• Grade the two lengths together so the 12 cm step stays constant across sizes.
• Print area sits on the wearer's left, clear of the offset seam: 26 x 30 cm.
More templates like this
© 2026 LineDrop · Starting specs — always make a sample first.